Now for section 4 of the sketchup table tutorial.
Up until now we have been working on the top and outside view of the table apron and legs. Now we will push up the inside to create the actual apron boards.
First to define the boards, use the Tape measure and place a guideline 3/4 of an inch in from the bottom corner on all four apron boards. See the picture.
Now use the line tool to draw a line parallel to each edge ¾ of an inch away from the corner.
When all four lines are drawn. You can click edit and delete guides to get rid of the guidelines.
Now use the push/pull tool and push up the bottom center,
so just click on the push/pull tool then on the bottom and enter 3
Your table should now look like the picture above.
Save your drawing.
