Reply
Apprentice Member
IndianaHusker
Posts: 5
Registered: ‎11-12-2009
0

Elio Drive

Looking for some feedback on the Elio Drive (s)?   Any recommendations?

Honored Advisor
johnclucas
Posts: 2,060
Registered: ‎10-26-2009
0

Re: Elio Drive

Never heard of it. 

Frequent Contributor
turn_a_round
Posts: 43
Registered: ‎10-24-2009
0

Re: Elio Drive

[ Edited ]

More info on the Elio drive is at http://www.langercraftworks.com/catalog/10

 

Also a youtube video at http://www.youtube.com/watch?v=tQQI_Zr7bC8

Honored Advisor
johnclucas
Posts: 2,060
Registered: ‎10-26-2009
0

Re: Elio Drive

Looks intriguing. I built sort of the same thing but with 3 teeth.  I took a 1 1/4 x 8 Nut and drilled 3 holes in it.  Then I stuck some sharpened metal dowels in.   I use it for turning bowls when I start them between centers with the bark side toward the headstock.   Works fairly well but I made my spikes too long. 

 

© Copyright 2009, Meredith Corporation. All Rights Reserved | Privacy Policy | By using this site, you agree to our Terms of Service.