Tools and Tool Buying

[ynoT]

Woodie,

Are you serious that PC jig will not take 1/2" shank bits?

Do you need to use guide bushings on that jig?

Can you return the bit?

Tony

[RussBoyd]

Another vote for 1/2".

[John Courtland]

Same question I had Tony, I got the PC jig and it came with a half inch shank dovetail bit.  Can you elaborate woodie?

[davidmcraig]

In the matter involving the PC dovetail guide - You have to keep in mind that the shank of the router bit you use might also have to fit inside a template bushing. Let's say you have a 1/2" shank dovetail bit, and you need to use a 7/16" template bushing to use the jig, can you see where you might have a problem? Something I will have to remember to keep in mind prior to a new project. I usually invest in 1/2" shanks myself and I can see where I might want to check my existing bits before starting the project.

[Jon439]

You may also run across 8mm router bits. They are the European standard and some are floating around the U.S. Some router manufacturers are offering 8mm collets for their machines.

[Old Woodie]

it is an old model, and I am sure that it will not accept a 1/2" bit. I wonder if I can get a replacement plate that will?  I doubt it though.