Reply
Apprentice Visitor
poppuch
Posts: 1
Registered: ‎07-27-2011
0

Spiral Scroll Saw Blades with pins

Where can I buy spiral scroll saw blades with pins.  They seem to be hard to find.  Arthur

Senior Contributor
charliew
Posts: 461
Registered: ‎12-01-2009
0

Re: Spiral Scroll Saw Blades with pins

I belive ohlson blades makes them. you should be able to find them on line.

Senior Contributor
steamshovel1
Posts: 186
Registered: ‎03-23-2010
0

Re: Spiral Scroll Saw Blades with pins

I don,t think there is such a blade. I would buy if there was.

They leave the human race at age 13 and come back in at age 20.
Contributor
djc37
Posts: 12
Registered: ‎01-10-2010
0

Re: Spiral Scroll Saw Blades with pins

Sloans wood shop say 'Sorry but no one makes a pinned spiral blade'

Senior Contributor
Dan Gallo
Posts: 268
Registered: ‎10-22-2009
0

Re: Spiral Scroll Saw Blades with pins

Sorry, Nobody makes a pinned spiral blade!

Dan in So.Ca.
Advisor
Rrandy
Posts: 1,626
Registered: ‎11-05-2009

Re: Spiral Scroll Saw Blades with pins

Depending on the saw, there are pinned to pinless/flat blade adaptors.

Never do anything you don't want to explain to the EMT.

Advisor
tomsteve1967
Posts: 811
Registered: ‎10-23-2009
0

Re: Spiral Scroll Saw Blades with pins

http://www.scrollsawer.com/forum/

 

 

this is a great site for scrollsawyers to register at and find information, but i think there arent any manufacturers of pinned spiral blades. how bout lookin into an adapter kit to convert to pinless blades?

no matter what i build or how many times i build it, it's all practice.
Esteemed Advisor
smallpatch1
Posts: 2,715
Registered: ‎10-23-2009
0

Re: Spiral Scroll Saw Blades with pins

Don't think I ever seen them for sale. My experience with spiral blades is they leave the edges so ruff it causes too much sanding where as if you use good regular blades you never have to sand the edges at all.

Advisor
Rrandy
Posts: 1,626
Registered: ‎11-05-2009
0

Re: Spiral Scroll Saw Blades with pins

I remember seeing some spiral blades with reverse teeth on bottom but I never could get to like them. They liked to follow the grain more than the pattern line. Lots of people use them though.

Never do anything you don't want to explain to the EMT.

Advisor
tomsteve1967
Posts: 811
Registered: ‎10-23-2009
0

Re: Spiral Scroll Saw Blades with pins

the spiral blades are used more for portrait work.100_2280.JPG

 

 

to get rid of the fuzzies on the back, i use a torch set on low and burn em off. makes quick work of it.100_2360.JPGtheres a LOT of cuts in the butterfly ( and a lot of tigers,too) and it is a lot easier when the work piece doesnt have to be spun 360 degrees for every cut.

no matter what i build or how many times i build it, it's all practice.

 

© Copyright 2009, Meredith Corporation. All Rights Reserved | Privacy Policy | By using this site, you agree to our Terms of Service.