Reply
Contributor
MauriceRichard
Posts: 14
Registered: ‎08-12-2010
0

Drive belt for old Delta 36-320C

table saw 1.jpgHi everyone,

I"ve been looking to replace a broken belt on my table saw for a while now, and am frankly not having very much luck.  I think it's because the saw is getting old.  It's a Delta 36-320C Contractor saw, I bought it in Canada but I'm being told parts for this saw are not available any more in Canada.  I've not had much luck in the US either.  Google is not being nice to me, all places I have found are either out of stock or send me to Rockwell, which may have bought out Delta for all I know.  These are the two closest I've come so far.

 

http://www.toolpartsdirect.com/rockwell-36-320c-construction-36-320c.html

 

http://www.federatedtool.com/

 

Any concrete help would be most appreciated.

 

Thanks!

Maurice

Apprentice Contributor
helenrschoene
Posts: 8
Registered: ‎11-15-2013
0

Re: Drive belt for old Delta 36-320C

You do not need to find a Delta part. The belt is almost certainly a standard size that you can find at a motor house or automotive parts store.


U
Esteemed Advisor
hankm
Posts: 2,100
Registered: ‎11-07-2010
0

Re: Drive belt for old Delta 36-320C

The link you posted shows a direct drive saw, are you sure you need a belt or are you simply speculating? Drive belts are easy to spec. and replace.

Don't ask advice on federal firearms law from people on the internet unless you like jail food.




- Beachside Hank, WOOD Online Video Host

Contributor
MauriceRichard
Posts: 14
Registered: ‎08-12-2010
0

Re: Drive belt for old Delta 36-320C

IMG_20140426_121056.jpg

 

Well, this is the location where the belt goes.  I've been having a hard time to find any info on the saw to be honest.

Honored Advisor
71166
Posts: 2,518
Registered: ‎10-24-2009
0

Re: Drive belt for old Delta 36-320C

[ Edited ]

 Try looking up the parts for a model 36-600 which is the US version.    The parts list show # 34-674 for the belt.

 Check this Amazon listing to see if the belt looks to be correct.  It is 1" wide and a circumference of 10" 3/8"

  Here is the LINK.      Roly   You may be able to get this part locally. Another standard nnumber for this belt is 100XL100.    Hope this helps

Contributor
MauriceRichard
Posts: 14
Registered: ‎08-12-2010
0

Re: Drive belt for old Delta 36-320C

yes that certainly looks like the one, unfortunately, Amazon.com will not sell to Canada and Amazon.ca does not carry it.  I will bring the numbers to a local tool supply to see.

 

Thanks for this great info.

Contributor
MauriceRichard
Posts: 14
Registered: ‎08-12-2010
0

Re: Drive belt for old Delta 36-320C

Well. good news, I just found a place on Amazon.com that will actually ship to Canada, it will cost me almost $100 for 2 belts but I have ordered them.  Thanks for everyone's help.

Esteemed Advisor
p_toad
Posts: 3,496
Registered: ‎12-31-2009
0

Re: Drive belt for old Delta 36-320C

that sounds all wrong for the compartive price on those belts.  for that much money they better come with a 10 year guarantee.   the one parts diagram i found shows:

 

 

Ref      Model      Product Name

226    34-674     DRIVE BELT/34-670

 

 

Contributor
MauriceRichard
Posts: 14
Registered: ‎08-12-2010
0

Re: Drive belt for old Delta 36-320C

Well, the belts themselves are not so expensive, it's shipping, tax and duties that all add up.

Senior Advisor
GeorgeK-NJ
Posts: 1,646
Registered: ‎10-30-2009
0

Re: Drive belt for old Delta 36-320C


MauriceRichard wrote:

Well, the belts themselves are not so expensive, it's shipping, tax and duties that all add up.


If the price is only about $5.00 based on the link, you should of asked someone in the states to ship it up to you.  I've shipped things to Canada before and it was pretty cheap.

George K
Aberdeen, NJ

"I keep cutting and it's still to short"

"Stupid is Expensive"

 

© Copyright 2009, Meredith Corporation. All Rights Reserved | Privacy Policy | By using this site, you agree to our Terms of Service.